滑軌總成檢測

滑軌總成檢測項目報價？??解決方案？??檢測周期？??樣品要求？

點 擊 解 答??

GB/T 6809.2-2013往復式內燃機 零部件和系統術語 第2部分:氣門、凸輪軸傳動和驅動機構

GB/T 6809的本部分規定了與往復式內燃機氣門、凸輪軸傳動和驅動機構有關的術語。GB/T 1883.1則提供了往復式內燃機的分類和規定了這種內燃機及其工作特性的基本術語。

GB 7258-2017機動車運行安全技術條件

本標準規定了機動車的整車及主要總成、安全防護裝置等有關運行安全的基本技術要求，以及消防車、救護車、工程救險車和警車及殘疾人專用汽車的附加要求。本標準適用于在我國道路上行駛的所有機動車，但不適用于有軌電車及并非為在道路上行駛和使用而設計和制造、主要用于封閉道路和場所作業施工的輪式專用機械車。

GB/T 33641.2-2017農林拖拉機和機械 安全帶 第2部分:固定裝置強度要求

GB/T 33641的本部分規定了駕駛員用約束髖部的座椅安全帶總成的固定裝置的術語和定義、強度要求。本部分適用于農林拖拉機和自走式機械。

GB 51062-2014煤礦設備安裝工程施工規范

本規范適用于煤礦建設及生產系統設備安裝工程的施工。

MT/T 1076-2008煤炭地質鉆探規程

本標準規定了煤炭地質鉆探工作野外作業工藝技術要求和安全生產要求。本標準適用于在中華人民共和國領域內的煤炭地質鉆探工作設計、生產和安全評價、管理。標準不適用于使用煤炭地質鉆探技術手段和方法從事其延伸業的設計、生產和安全評價、管理。

JTJ 280-2002港口設備安裝工程技術規范

本規范適用于新建、改建和擴建港口設備安裝工程的施工及驗收。

JGJ 160-2016施工現場機械設備檢查技術規范

本規范適用于新建、擴建和改建的工業與民用建筑及市政工程施工現場機械設備的檢查。

DZ/T 0065-1993坑道鉆機技術條件

本標準規定了坑道鉆機(以下簡稱鉆機)的技術特性、技術要求、試驗方法和檢驗規則。\t本標準適用于DZ/T 0052-93((坑道鉆機系列》規定的鉆機。

QC/T 47-2013汽車座椅術語

本標準界定了汽車座椅術語及其定義。本標準適用于M<下標1>類(GB/T 15089-2001)車輛的座椅,也可推廣使用于載貨汽車、客車的座椅。

QC/T 291-1999汽車機械式分動器性能要求

本標準規定了汽車機械式分動器性能要求。　　本標準適用于越野汽車、特種用途專用汽車所使用的機械式齒輪分動器。

QC/T 805-2008乘用車座椅用滑軌技術條件

本標準規定了乘用車座椅用滑軌的技術要求，試驗方法，檢驗規則及標志、包裝、運輸和儲存要求。本標準適用于M<下標 1>類車輛的座椅用滑軌。M<下標 2>和M<下標 3>類車輛的座椅用滑軌可參照執行。

QC/T 831-2010乘用車座椅用電動滑軌技術條件

本標準規定了乘用車座椅用電動滑軌的技術要求、試驗方法、檢驗規則和標志、包裝、運輸、儲存。本標準適用于M<下標1>類車輛的座椅用電動滑軌，M<下標2>和M<下標3>類車輛的座椅用電動滑軌可參照執行。

JB/T 11783.2-2014往復式內燃機 附件傳動系統 ?第2部分:試驗方法

JB/T 11783的本部分規定了帶、帶輪和張緊器的試驗方法和檢驗規則。本部分適用于往復式內燃機的附件傳動系統。對其他行業用傳動系統的帶、帶輪和張緊器，只要制造廠和客戶商定，也可對本部分作適當修改后使用。

EN ISO 13628-1-2005石油和天然氣工業.水下采油系統的設計和操作.第1部分:一般要求和建議 ISO 13628-1-2005

This part of ISO 13628 provides general requirements and overall recommendations for development of complete subsea production systems, from the design phase to decommissioning and abandonment.This part of ISO 13628 is intended as an umbrella document to govern other parts of ISO 13628 dealing with more detailed requirements for the subsystems which typically form part of a subsea production system. However, in some areas (e.g. system design, structures, manifolds, lifting devices, and colour and marking) more detailed requirements are included herein, as these subjects are not covered in a subsystem standard.The complete subsea production system comprises several subsystems necessary to produce hydrocarbons from one or more subsea wells and transfer them to a given processing facility located offshore (fixed, floating or subsea) or onshore, or to inject water/gas through subsea wells.This part of ISO 13628 and its related subsystem standards apply as far as the interface limits described in Clause 4.Specialized equipment, such as split trees and trees and manifolds in atmospheric chambers, are not specifically discussed because of their limited use. However, the information presented is applicable to those types of equipment.If requirements as stated inThis part of ISO 13628 are in conflict with, or are inconsistent with, requirements as stated in the relevant complementary parts of ISO 13628, then the specific requirements in the complementary parts take precedence.

NF E51-230-1-2008石油、石化和天然氣工業.旋轉型容積式壓縮機.第1部分:推移式壓縮機

La présente partie de l'ISO 10440 spécifie les exigences relatives aux compresseurs rotatifs hélico?daux à lobes droits, à sec et plongés dans l'huile (voir Figure 1), utilisés dans les services d'industries du pétrole, de la pétrochimie et du gaz naturel pour créer des surpressions ou des dépressions ou les deux à la fois. Elle concerne les compresseurs à service spécial.Elle ne s'applique pas aux compresseurs à air standard, aux compresseurs à anneau liquide et aux compresseurs à palettes.

DIN 19704-1-2014鋼制液壓結構件.第1部分:設計和計算準則

This standard is to be used for the calculation and construction of hydraulic steel structures consisting of steel constructions, mechanical engineering components and the electric equipment. These structures cover movable sealing devices (\"locks\") including sealings and mountings, the drives and the connecting components between the lock body and the driving devices. This standard is applicable to hydraulic steel structures which are to be built from scratch. If this standard is intended to be applied for purposes of reconstruction, repair or addition of components to existing older steel structures, it shall be distinguished by declaration to which components this standard applies. This standard also applies to inspection covers and components such as intake rakes, bollards, fenders and channel bridges. It may be applied analogously to penstocks including valves and controls. This standard is not applicable to dolphins, training works, shore enclosures, landing piers and offshore structures (e. g. offshore platforms, jack-up platforms). For small and less loaded structures, were the product of multiplying water pressure (in kN/m2) and dam area (in m2) under water weight is less than 50 (in kN), the user may deviate from the requirements of this standard provided there is no objection by the building owner. Requirements for hydraulic steel engineering according to this standard include steel constructions which are under strain of stagnant or flowing waters. They cover movable sealing devices and parts securely connected with the massive type of construction, such as track supports and bearing area. Steel structures build in conjunction with hydraulic steel structures, but which are not exposed to water pressure are to be designed and calculated according to the applicable construction regulations. Requirements for mechanical engineering according to this standard are applicable to machine structures responsible for the movement and the bearings of lock devices, e.

BS 4422-2005火災.詞匯

This standard defines terms specific to, and in general use by, fire protection agencies.Fire safety engineering and fire testing terms are covered in BS EN ISO 13943.This standard does not include terms where the standard dictionary definition is applicable. Neither does it include terms and definitions which are unique to any small specialized discipline within fire safety.

BS EN 60204-33-2011機械安全.機械的電氣設備.半導體制造設備要求

This part of IEC 60204 applies to electrical and electronic equipment associated withsemiconductor fabrication equipment for the manufacture, measurement, assembly, and test ofsemiconductors.NOTE 1 In this standard, the term electrical includes electrical, electronic, and programmable electronic matters(i.e. electrical equipment means electrical, electronic, and programmable electronic equipment).NOTE 2 In the context of this standard, the term person refers to any individual and includes those persons whoare assigned and instructed by the user or his agent(s) in the installation, use, and care of the fabricationequipment in question.The electrical equipment covered by this standard commences at the point of connection of thesupply to the electrical equipment (see 5.1), and includes proper instruction for its safeinstallation.NOTE 3 For the requirements for the electrical supply installation in buildings, see IEC 60364 series.This part is applicable to the electrical equipment or parts of the electrical equipment thatoperate with nominal supply voltages not exceeding 1 000 V for alternating current (a.c.) andnot exceeding 1 500 V for direct current (d.c.), and with nominal supply frequencies notexceeding 200 Hz. For higher voltages or frequencies, special requirements may be needed.NOTE 4 Electrical equipment within which derived voltages exceed these supply voltage limits is within the scopeof this standard.Included are requirements for protective measures against electrical safety hazards as well aselectrical interlock circuits that protect against non-electrical hazards. However, it does notcover all the requirements that are needed or required by other standards or regulations inorder to safeguard persons from hazards other than electrical hazards (e.g. chemical hazards,mechanical hazards, radiation hazards). Each type of machine has unique requirements to beaccommodated to provide adequate safety.Additional and special requirements can apply to the electrical equipment of fabricationequipment that:? use, process, or produce potentially explosive material;? are used in potentially explosive and/or flammable atmospheres;? have special risks when producing or using certain materials;? are hoisting machines (which are covered by IEC 60204-32).This standard does not include specifications for performance or functional characteristics ofthe fabrication equipment.This standard does not deal with the possible effects on human health that can result fromemissions (for example EMFs, noise) from the fabrication equipment.This standard does not specify requirements for electromagnetic compatibility (EMC).